A tissue was all this robot crab needed for its next trick. At the Internet of Light Expo in Wuzhen, Zhejiang, KingKong Technology’s physical Jumper, nicknamed Tiaotiao (跳跳), held a tissue in its claw and wiped an unnamed visitor’s shoe, according to the maker. The expo ran November 2–5, 2026. The company’s report appeared November 6 and does not give the exact day of the wipe.

The demonstration illustrates how a claw can handle a soft object with a simple job: pinch a tissue, bring it against the shoe, and move side to side while keeping hold of the paper.

Original diagram of a crab-like claw holding a tissue next to a visitor’s shoe.

Original BotsTest schematic, not event footage or a measured trajectory.

The paper is the tool

A claw that can pick up a tissue still has another job once the tissue touches the shoe: hold onto it while it moves against the surface. That is why the paper is the most interesting part of the demonstration. The claw holds it; the paper does the wiping.

Original diagram of the tissue moving sideways across the shoe while held by the claw.

Original BotsTest schematic, not event footage or a measured trajectory.

What the demonstration leaves open

KingKong Technology describes the movement but does not disclose how it was controlled. The visitor’s request is not evidence that the robot recognized speech. There is no reported cleaning measurement or repeatability test, just one readily understood use of a claw and a small, soft object.

Sources: KingKong Technology’s November 6 report and the expo opening report.

Turn the shortlist into a decision

Write down the task, operating conditions, success criteria and total ownership costs. Ask shortlisted suppliers to demonstrate your representative task, including failure recovery. Use the same acceptance test for each candidate.

Explore the full robotics directory →