ABB · Industrial
IRB 1010 · IRB 1010-1.5/0.37 · OmniCore · standard IP40
Official mechanical variant with standard protection; controller supply, optional equipment and procurement availability require separate verification. Source revision J.
Baseline specifications checked
Availability awaiting verification · Checked 2026-11-22
Application classification
Industrial · Articulated arm · Professional
Historical manufacturer brochure dated 2024-08-23. Current orderability and optional controller compatibility require confirmation.
Detailed parameters
31 / 32 fields checked within the recorded source scope
This is a documentation checklist, not a performance score. Missing values are not zero, and support is not implied.
Physical specifications 13 / 17
| Parameter | Value and conditions | Source and verification |
|---|---|---|
| Overall dimensions | Not yet verified | No sourced value recorded for this edition. |
| Weight | 13.5 kg | 3HAC081966-001 Rev J · p. 21 |
| Degrees of freedom | 6 | 3HAC081966-001 Rev J · p. 57 |
| Payload | 1.5 kg | 3HAC081966-001 Rev J · p. 9 |
| Reach | 370 mm | 3HAC081966-001 Rev J · p. 9 |
| Repeatability | 0.01 mm | 3HAC081966-001 Rev J · p. 57 |
| Path repeatability | 0.01 mm | 3HAC081966-001 Rev J · p. 57 |
| Accuracy and measurement conditions | 0.01 mm | 3HAC081966-001 Rev J · p. 57 |
| Path accuracy | 0.45 mm | 3HAC081966-001 Rev J · p. 57 |
| Pose stabilization time | 0.04 s | 3HAC081966-001 Rev J · p. 57 |
| Speed | Not found in reviewed sources | No configuration-specific maximum TCP speed has been verified in the reviewed mechanical tables. ISO test velocity and maximum joint speeds are not substituted for maximum TCP speed. |
| Maximum joint speeds | A1 320; A2 320; A3 375; A4 500; A5 470; A6 500 deg/s | 3HAC081966-001 Rev J · p. 58 |
| Mounting and footprint | Floor (0 deg); inverted (180 deg) | 3HAC081966-001 Rev J · p. 21 |
| Foundation requirements | Flatness 0.1/500 mm; recommended minimum resonance 22 Hz; yield strength >=150 MPa | 3HAC081966-001 Rev J · p. 23 |
| Joint ranges and speeds | A1 +/-170; A2 -75/+125; A3 -180/+50; A4 +/-170; A5 +/-125; A6 default +/-360 deg | 3HAC081966-001 Rev J · p. 54 |
| Force sensing and control | Requires additional official documentation | This mechanical product specification does not establish the full force requirement for the configured system. Additional controller, software, safety or application documents must be reviewed. |
| End-effector and tool interface | Requires additional official documentation | This mechanical product specification does not establish the full tool requirement for the configured system. Additional controller, software, safety or application documents must be reviewed. |
Power and operating environment 5 / 5
| Parameter | Value and conditions | Source and verification |
|---|---|---|
| Power supply and consumption | 0.16 kW | 3HAC081966-001 Rev J · p. 25 |
| IP rating | IP40 | 3HAC081966-001 Rev J · p. 24 |
| Operating temperature | 0 to 45 degC | 3HAC081966-001 Rev J · p. 24 |
| Operating humidity | <=95% at constant temperature RH | 3HAC081966-001 Rev J · p. 24 |
| Noise and measurement conditions | 56.2 dB(A) Leq | 3HAC081966-001 Rev J · p. 25 |
Perception, software and integration 4 / 7
| Parameter | Value and conditions | Source and verification |
|---|---|---|
| I/O and communication interfaces | 12 customer power/signal wires, 30 V, 1.54 A; 2 pneumatic lines, maximum 5 bar | 3HAC081966-001 Rev J · p. 32 |
| Controller configuration | OmniCore | 3HAC081966-001 Rev J · p. 3 |
| Software and operating system | RobotWare on OmniCore | 3HAC081966-001 Rev J · p. 12 |
| SDK | Requires additional official documentation | This mechanical product specification does not establish the full sdk requirement for the configured system. Additional controller, software, safety or application documents must be reviewed. |
| ROS support | Requires additional official documentation | This mechanical product specification does not establish the full ros requirement for the configured system. Additional controller, software, safety or application documents must be reviewed. |
| Software license and access | Requires additional official documentation | This mechanical product specification does not establish the full license requirement for the configured system. Additional controller, software, safety or application documents must be reviewed. |
| Hardware requirements | OmniCore controller family required | 3HAC081966-001 Rev J · p. 3 |
Safety, application and support 2 / 3
| Parameter | Value and conditions | Source and verification |
|---|---|---|
| Documented intended use | Miniaturized electronics and wearable-device manufacturing; compact-space processes and classroom education. | 3HAC081966-001 Rev J · p. 9 |
| Safety functions and standards | Requires additional official documentation | This mechanical product specification does not establish the full safety requirement for the configured system. Additional controller, software, safety or application documents must be reviewed. |
| Warranty and support | 12 months after customer delivery or 18 months after factory shipment, whichever occurs first | 3HAC081966-001 Rev J · p. 76 |
Price records
No verified price recorded. Request a configuration-specific quotation.