ABB · Industrial · Articulated arm

IRB 1600

Official identity · Checked 2026-11-22

Correct this profile ↗
ABBIRB 1600

An approved model photograph has not been added yet.

View official product images ↗

Model overview

Availability awaiting verification · Checked 2026-11-22

PriceQuotation required
Rated arm payload
10 kg
Working reach
1200 mm
Pose repeatability
0.02 mm
Robot weight
250 kg
Total degrees of freedom
6
IP rating
IP54

18 / 29 parameter fields backed by recorded evidence

Highlights refer only to the selected edition. Read measurement conditions and sources before comparing.

Application and positioning

Officially documented robot platform. Select a configuration to inspect sourced specifications.

Application domain
Industrial
Morphology
Articulated arm
Customer type
Professional
Product application evidence ↗

Configuration lineup

Compare exact editions; model names alone do not establish compatibility.

IRB 1600 · Published configuration editions
ConfigurationKey parametersDevelopment supportRecorded priceVerification and actions
IRB 1600-10/1.2 · IRC5 · standard IP54

Availability awaiting verification

2026-11-22

Payload 10 kg
Nominal handling capacity for this exact mechanical variant. Optional tool loads and load diagrams must be respected.
Source

Reach 1200 mm
Manufacturer-declared reach for the named variant; reference geometry follows the source.
Source

Weight 250 kg
Manipulator only; additional options, tools and other fitted equipment are excluded.
Source

Repeatability 0.02 mm
Manufacturer ISO 9283 test: rated load and offset, inclined plane, all six axes moving; individual results depend on pose, approach and load conditions.
Source

Not yet verifiedQuotation required

18 / 29 documented fields

Full edition specifications →
IRB 1600-10/1.45 · IRC5 · standard IP54

Availability awaiting verification

2026-11-22

Payload 10 kg
Nominal handling capacity for this exact mechanical variant. Optional tool loads and load diagrams must be respected.
Source

Reach 1450 mm
Manufacturer-declared reach for the named variant; reference geometry follows the source.
Source

Weight 250 kg
Manipulator only; additional options, tools and other fitted equipment are excluded.
Source

Repeatability 0.05 mm
Manufacturer ISO 9283 test: rated load and offset, inclined plane, all six axes moving; individual results depend on pose, approach and load conditions.
Source

Not yet verifiedQuotation required

18 / 29 documented fields

Full edition specifications →
IRB 1600-6/1.2 · IRC5 · standard IP54

Availability awaiting verification

2026-11-22

Weight 250 kg
Manipulator only; additional options, tools and other fitted equipment are excluded.
Source

Payload 6 kg
Nominal handling capacity for this exact mechanical variant. Optional tool loads and load diagrams must be respected.
Source

Reach 1200 mm
Manufacturer-declared reach for the named variant; reference geometry follows the source.
Source

Repeatability 0.02 mm
Manufacturer ISO 9283 test: rated load and offset, inclined plane, all six axes moving; individual results depend on pose, approach and load conditions.
Source

Not yet verifiedQuotation required

18 / 29 documented fields

Full edition specifications →
IRB 1600-6/1.45 · IRC5 · standard IP54

Availability awaiting verification

2026-11-22

Payload 6 kg
Nominal handling capacity for this exact mechanical variant. Optional tool loads and load diagrams must be respected.
Source

Reach 1450 mm
Manufacturer-declared reach for the named variant; reference geometry follows the source.
Source

Weight 250 kg
Manipulator only; additional options, tools and other fitted equipment are excluded.
Source

Repeatability 0.02 mm
Manufacturer ISO 9283 test: rated load and offset, inclined plane, all six axes moving; individual results depend on pose, approach and load conditions.
Source

Not yet verifiedQuotation required

18 / 29 documented fields

Full edition specifications →
IRB 1600-10/1.2

Availability awaiting verification

2026-11-22

Detailed specifications pending verification.Not yet verifiedQuotation required

1 / 23 documented fields

Full edition specifications →
IRB 1600-10/1.45

Availability awaiting verification

2026-11-22

Detailed specifications pending verification.Not yet verifiedQuotation required

1 / 23 documented fields

Full edition specifications →
IRB 1600-6/1.2

Availability awaiting verification

2026-11-22

Detailed specifications pending verification.Not yet verifiedQuotation required

1 / 23 documented fields

Full edition specifications →
IRB 1600-6/1.45

Availability awaiting verification

2026-11-22

Detailed specifications pending verification.Not yet verifiedQuotation required

1 / 23 documented fields

Full edition specifications →
Download parameter sheet (CSV) ↓

Detailed parameters · IRB 1600-10/1.2 · IRC5 · standard IP54

18 / 29 parameter fields backed by recorded evidence

25 / 29 fields checked within the recorded source scope

This is a documentation checklist, not a performance score. Missing values are not zero, and support is not implied.

Physical specifications 10 / 15
Physical specifications · IRB 1600-10/1.2 · IRC5 · standard IP54
ParameterValue and conditionsSource and verification
Overall dimensionsNot yet verifiedNo sourced value recorded for this edition.
Weight

250 kg
Manipulator only; additional options, tools and other fitted equipment are excluded.

3HAC023604-001 Rev AW · p. 22
Official statement · 2026-11-22
Document date 2026-06-16

Degrees of freedom

6
Six axes are explicitly identified by the source motion/performance tables.

3HAC023604-001 Rev AW · p. 59
Official statement · 2026-11-22
Document date 2026-06-16

Payload

10 kg
Nominal handling capacity for this exact mechanical variant. Optional tool loads and load diagrams must be respected.

3HAC023604-001 Rev AW · p. 14
Official statement · 2026-11-22
Document date 2026-06-16

Reach

1200 mm
Manufacturer-declared reach for the named variant; reference geometry follows the source.

3HAC023604-001 Rev AW · p. 14
Official statement · 2026-11-22
Document date 2026-06-16

Repeatability

0.02 mm
Manufacturer ISO 9283 test: rated load and offset, inclined plane, all six axes moving; individual results depend on pose, approach and load conditions.

3HAC023604-001 Rev AW · p. 59
Official statement · 2026-11-22
Document date 2026-06-16

Path repeatability

0.06 mm
Manufacturer ISO 9283 test: rated load and offset, inclined plane, all six axes moving; individual results depend on pose, approach and load conditions. Table footnote: this value is measured at 250 mm/s.

3HAC023604-001 Rev AW · p. 59
Official statement · 2026-11-22
Document date 2026-06-16

Accuracy and measurement conditions

0.01 mm
Manufacturer ISO 9283 test: rated load and offset, inclined plane, all six axes moving; individual results depend on pose, approach and load conditions. AP uses the source definition relative to a taught/programmed point; not an unconditional absolute accuracy guarantee.

3HAC023604-001 Rev AW · p. 59
Official statement · 2026-11-22
Document date 2026-06-16

Path accuracy

0.20 mm
Manufacturer ISO 9283 test: rated load and offset, inclined plane, all six axes moving; individual results depend on pose, approach and load conditions. Table footnote: this value is measured at 250 mm/s.

3HAC023604-001 Rev AW · p. 59
Official statement · 2026-11-22
Document date 2026-06-16

Pose stabilization time

0.09 s
Within 0.2 mm of position. Manufacturer ISO 9283 test: rated load and offset, inclined plane, all six axes moving; individual results depend on pose, approach and load conditions.

3HAC023604-001 Rev AW · p. 59
Official statement · 2026-11-22
Document date 2026-06-16

SpeedNot found in reviewed sources

No configuration-specific maximum TCP speed has been verified in the reviewed mechanical tables. ISO test velocity and maximum joint speeds are not substituted for maximum TCP speed.
3HAC023604-001 Rev AW · motion/performance sections · 2026-11-22

Mounting and footprint

Floor; wall; suspended; tilted, subject to load limits
Mounting orientation must be configured correctly in controller parameters. The source prints 18 deg for suspended installation on p.22; that angle is not normalized or relied upon and requires clarification.

3HAC023604-001 Rev AW · p. 22
Official statement · 2026-11-22
Document date 2026-06-16

Joint ranges and speedsNot yet verifiedNo sourced value recorded for this edition.
Force sensing and controlRequires additional official documentation

This mechanical product specification does not establish the full force requirement for the configured system. Additional controller, software, safety or application documents must be reviewed.
3HAC023604-001 Rev AW · scope and referenced documents · 2026-11-22

End-effector and tool interfaceRequires additional official documentation

This mechanical product specification does not establish the full tool requirement for the configured system. Additional controller, software, safety or application documents must be reviewed.
3HAC023604-001 Rev AW · scope and referenced documents · 2026-11-22

Power and operating environment 3 / 4
Power and operating environment · IRB 1600-10/1.2 · IRC5 · standard IP54
ParameterValue and conditionsSource and verification
Power supply and consumptionNot yet verifiedNo sourced value recorded for this edition.
IP rating

IP54
Standard protection package only; optional protection packages are recorded separately.

3HAC023604-001 Rev AW · p. 25
Official statement · 2026-11-22
Document date 2026-06-16

Operating temperature

5 to 45 degC
Operating ambient; check source option/environment limits.

3HAC023604-001 Rev AW · p. 25
Official statement · 2026-11-22
Document date 2026-06-16

Operating humidity

<=95% at constant temperature RH
No condensation; source option-specific conditions remain applicable.

3HAC023604-001 Rev AW · p. 25
Official statement · 2026-11-22
Document date 2026-06-16

Perception, software and integration 3 / 7
Perception, software and integration · IRB 1600-10/1.2 · IRC5 · standard IP54
ParameterValue and conditionsSource and verification
I/O and communication interfacesNot yet verifiedNo sourced value recorded for this edition.
Controller configuration

IRC5
Controller family in the source. This entry is a mechanical/base-protection variant, not a verified complete supplied package.

3HAC023604-001 Rev AW · p. 3
Official statement · 2026-11-22
Document date 2026-06-16

Software and operating system

RobotWare on IRC5
Software release and licensed options must match the selected controller; no SDK/ROS compatibility is inferred.

3HAC023604-001 Rev AW · p. 11
Official statement · 2026-11-22
Document date 2026-06-16

SDKRequires additional official documentation

This mechanical product specification does not establish the full sdk requirement for the configured system. Additional controller, software, safety or application documents must be reviewed.
3HAC023604-001 Rev AW · scope and referenced documents · 2026-11-22

ROS supportRequires additional official documentation

This mechanical product specification does not establish the full ros requirement for the configured system. Additional controller, software, safety or application documents must be reviewed.
3HAC023604-001 Rev AW · scope and referenced documents · 2026-11-22

Software license and accessRequires additional official documentation

This mechanical product specification does not establish the full license requirement for the configured system. Additional controller, software, safety or application documents must be reviewed.
3HAC023604-001 Rev AW · scope and referenced documents · 2026-11-22

Hardware requirements

IRC5 controller family required
Exact controller model, power supply, tooling and software/options must be confirmed for the supplied system.

3HAC023604-001 Rev AW · p. 3
Official statement · 2026-11-22
Document date 2026-06-16

Safety, application and support 2 / 3
Safety, application and support · IRB 1600-10/1.2 · IRC5 · standard IP54
ParameterValue and conditionsSource and verification
Documented intended use

Arc welding, machine tending, material handling, gluing and deburring/grinding.
Manufacturer intended-use statement; this is not a validated site deployment.

3HAC023604-001 Rev AW · p. 11
Official statement · 2026-11-22
Document date 2026-06-16

Safety functions and standardsRequires additional official documentation

This mechanical product specification does not establish the full safety requirement for the configured system. Additional controller, software, safety or application documents must be reviewed.
3HAC023604-001 Rev AW · scope and referenced documents · 2026-11-22

Warranty and support

12 months after customer delivery or 18 months after factory shipment, whichever occurs first
Standard option 438-1; manufacturer terms apply. See source for maintenance, exclusions and alternative warranty options.

3HAC023604-001 Rev AW · p. 77
Official statement · 2026-11-22
Document date 2026-06-16

Price records · IRB 1600-10/1.2 · IRC5 · standard IP54

Request a configuration-specific quotation

No verified price recorded. Request a configuration-specific quotation.

Recorded prices are dated evidence, not a live stock or delivery commitment. Check currency, taxes, accessories and integration scope with the publisher.

Photographs and provenance

Photographs identify the model; they do not prove which configuration or optional equipment is supplied.

An approved model photograph has not been added yet.

View official product images ↗

Catalog sources and verification boundaries

Reference facts describe a model, may combine editions and are not treated as verified hardware-configuration specifications.

Model identity source · 2026-11-22

ABB Robotics One · 2026-11-22

IRB 1600 Family

View the recorded source ↗

Official family summary: maxima may refer to different variants and are not single-edition specifications.

Family maximum payload as reported (kg)
10
Family maximum reach as reported (m)
1.45
Family repeatability figure as reported (mm)
0.02

Official product specification ↗

Official datasheet ↗

Suggest a correction or claim manufacturer ownership · Coverage and verification